RPA Data Center

Sample Copy: View Response #133,691
New ResponseNew Response
|
Edit ResponseEdit Response

SBRC Survey for Teachers

After discussion with the UESF Elementary Committee, SFUSD has put together a Task Force to review and provide guidance on revisions to the TK-5 Standards Based Report Cards.  The Task Force has defined the purpose of the SFUSD K-5 SBRC as follows: to provide a concise and periodic tool for communication among teachers, families and students that includes comprehensible information about a child’s social emotional development, academic development and unique assets.  In an effort to make this tool useful to teachers and families while serving the above purpose, feedback from both groups is essential.  Thank you for taking the time to provide feedback on your experience with the SBRCs.
Are you a teacher who completes the SBRCs?

No 

For which grade(s) have you completed SBRCs?

How often do you use the available rubrics to inform your completion of the SBRCs?

Always 

Approximately how long do you spend completing an SBRC for one student in its entirety?

60 + minutes 

What aspects of the SBRC do you find the most useful for communicating with families?

yes

What aspects of the SBRC do you find the LEAST useful for communicating with families?

Bank of America Corp.

What aspects of the SBRC do you think should not be changed?

mcmahonyildirim7

What aspects of the SBRC would you like to see changed for the 2015-2016 school year?

mcmahonyildirim7

What should be added to the SBRCs and why?

 

What should be omitted from the SBRCs and why?


 This page will explain to you all of kinds of steel part wall repairs, here may be just a few: side wall structure rusted across the skimmer or perhaps return fly, rusted in order to the point of split, and genuine rupture involving wall.
 
  OK, let's get started, we'll start with the most common of all side wall problems which will get rusted about the particular skimmer and return aircraft. 1st thing to do is remove the pool for you to regarding six inches listed below the skimmer or come back jet, whilst the swimming pool area is being exhausted, have off the top train track earlier mentioned and on equally sides of the skimmer, you may well have to help take a couple of sections away on possibly side involving the skimmer or come back jet. After that is certainly finished, take off the coping (plastic piece holding the ship in place). By now the pool should be exhausted enough to consider the skimmer or perhaps returning jet from the side divider. (All personal references to typically the skimmer, return fly and holes in the part wall, will be called to as skimmer)
 
  Nowadays, that's all completed, softly pull the ship upwards and over the side divider and expose the particular corroded as well as damaged skimmer hole. Next you establish how much you need to lower out to get eliminate in the rust, illustration, why don't say you establish of which you are going to need to reduce the hole 12 Back button doze inches then you may desire a piece of zinc-coated metal twenty four X twenty-four inches to protect the twelve X 13 hole. Often the zinc-coated material should become with least the identical size or the next size up. If your not really absolutely sure take a element of the wall membrane a person cut out, for size.
 
  OK! You got this zinc coated metal and your ready to placed that in place so what you just have to do is cut the opening for the skimmer, a person can use this skimmer as a template to cut the hole. Your next step is always to position typically the replacement item so that will your skimmer hole is level, the easiest approach to do this is definitely measure from the best of the area walls to the replacement on both sides the measurement need to be the same. Then use many duct tape to have it set up. A little trick to keep the many metal filings from heading in between the wall and layer is to insert a earth magnet in the punch bit even though drilling plus use some sort of medium speed with your drill down and the magnet will never fall off. After inside place you may get your tool and pointe ready, this size of rivets you need to use is anything from 3/16 to 1/4 inch, get yourself a big box because an individual will be space these individuals 1 inch aside.
 
  Take a look at get on with typically the going design, with a tape strategy make a line 1 in . through from all ends and a second line several ins in, now upon the one inch collection put a good hole inside each of the edges, next from each spot hole you measure 1 inch both equally horizontally together with vertically. Now from the following we all measure three long through each corner pit and drill another opening, nonetheless just before we drill down any more holes we like to put in a few rivets to hold this substitute in place well. As you discovered often the holes are a pair of in . apart continue through every single corner until you accomplish the center.
 
  Now to get  https://www.mister-pool.de/stahlwandbecken/  put a opening in the corner and one hole in every course two inches from your corner hole if anyone have completed it appropriate it should be among two rivets on often the one inch line therefore that all the rivets will be staggered. When you include all the rivets available you can drill often the cracks for the skimmer. The final step is usually to duct tape all this metal edges so their own is nothing sharp for you to touch the liner whenever put back in place. At this point all that is quit to perform, is to place everything back again the method that came aside.
 
  This specific proves the instruction for repairing the rust close to the pool skimmer plus the return jet and just about any hole in the part walls, for instruction in how to upgrade the whole section keep reading00.
 
  Abode forbid, you actually have gotten a new blow out, when your liner got messed up then it is an easy task to take it out and repair the section before putting in a fresh liner, if anyone were lucky along with your liner just obtained expanded a new bit then things get a bit trickier. If an individual were being really lucky a person possibly noticed a smooth spot in the wall in addition to checked it out and understood it was should retain fix rapidly. If any of these situations fits your trouble next the remedy is from palm. Read on.
 
  Initially, you will have to help have about half typically the pools leading rails out. Of course if you are upgrading the liner in comparison with they will all have to are provided off. Then remove the particular coping and elevate the particular boat over the section wall. Now depending upon the scale the pit, you will need a great further two feet of zinc-coated metal the exact same size in height as this existing metal. Cut out the rusted piece and put throughout your new piece. Right now from the end connected with the fresh sheet involving metal estimate in three inches and even score the line all the way through on the two ends, and a related line nine inches around from the ends.
 
  As well, make sure your lines don't brand up using one connected with your upright supports, once they do slide your screen one way or even often the other so that they don't brand up, OK, starting with this top measure down 1 inch on the about three half inch line and a pair of inches wide down on the particular nine inches line in addition to mark a drill ditch, and you keep on both lines two in . aside till you get to the particular bottom. Drill three or even four holes, then place in some rivets through the inside out, you want the smooth part on the inside involving the swimming pool area, and then continue drilling. If you have done with the rivets infuse duct tape on these people and on the edge associated with the metal make your own Pool back together all over again. I hope these instructions assisted you get additional years of pleasure outside of your pool.

Are you satisfied with the timing/ pacing of the SBRCs during the year?

No 

if no, then “What changes in timing or pacing of the SBRCs would you like to see?”

 

How challenging was it to use Synergy TeacherVue to complete your SBRCs?

 

What feedback do you have on using Synergy TeacherVue to complete your SBRCs?

 

What additional comments do you have that would inform the revision of our district’s SRBCs for 2014-2015?

 

Would you like to participate in hands-on revision of the SBRC as a member of the Task Force? (extended hour compensation is provided)

Yes 

If yes: “Please provide your email for more information.”

 

Any additional comments to add?

 
Created at 6/10/2020 9:51 AM  by  
Last modified at 6/10/2020 9:51 AM  by